Skip to content
Boiler Hire CompanyGet a quote
Menu

Emergency Boiler Hire

When the boiler plant fails in a building people work, learn or live in, a hired unit is usually the quickest way back to heat. What speeds it up most is the information you give in the first call.

Get a quote

What the hire firm will ask first

Have these to hand and the first conversation is much shorter.

SituationWhat usually works
Output of the failed boilerFrom the data plate, or the make and model.
FuelGas, oil, LPG or electric, and whether a supply is free near the plant room.
Where a unit could standYard, car park or roadside, and how far that is from the plant room.
AccessHeight and width limits, gates and whether a crane could reach.

Photos of the plant room and the outside space help a great deal. You can mention them in the form and send them once the firm is in touch.

Size it before you ask

Our calculator turns floor area, height and insulation into a rough load and the next standard hire size up. No prices, just the size.

Open the sizing calculator

Hire firms price per week, often with a one-week minimum, plus delivery, connection and fuel. How hire is priced.

First, keep people safe

If you smell gas or think a boiler is unsafe, leave it off and call the gas emergency line before anything else. Hiring a boiler comes after that.

Then think about the building. Employers have to keep workrooms at a reasonable temperature, normally at least 16 °C, or 13 °C for work involving severe physical effort (HSE). Portable heaters may bridge a day or two in a few rooms. For a whole building, a hire boiler on the existing pipework is usually the better answer.

Don't forget the hot water

If the failed boiler also heated a hot water cylinder or calorifier, the stored water may cool below the temperatures that control Legionella. HSE guidance is to store hot water at 60 °C or higher and distribute it at 50 °C or more at outlets, 55 °C in healthcare (HSE). Tell the hire firm the unit needs to cover hot water as well as heating, and speak to whoever manages your water hygiene.

Schematic of a hire boiler outside a building, with flow and return hoses to connection points on the building's heating pipework, and an oil tank in a bundYour buildingPlant room(old boiler offor removed)Heating circuitValved connection pointsFlowReturnHire boilertrailer or packaged unitFlueOil units: tankinside a bundPower for burnerand pumps
How a temporary boiler is usually joined to a building. A schematic, not to scale; the hire firm designs the actual connection for your site.

How to make the next emergency quicker

The single biggest saving comes from valved connection points on the flow and return, fitted ready for a temporary boiler. With them in place, connecting a hire unit is far simpler. If your building has had one emergency hire, it's worth asking the firm to fit them while it is there.

It also helps to keep a note of the boiler outputs, the fuel and the best standing spot with your building logbook, so whoever makes the call next time has it all to hand.

Sources for this page

How the hire usually runs

  1. Make it safe

    Isolate the failed plant and deal with any gas or water leak first.

  2. Send the details

    Output, fuel, standing and access. Photos help.

  3. Connect

    The unit is placed and joined to the heating, by a Gas Safe engineer for gas units.

  4. Fix and off-hire

    Once the permanent plant is repaired or replaced, the unit is collected.

Emergency Boiler Hire: common questions

How fast can an emergency boiler be on site?

It depends on where you are, the size you need, access and what the hire firm has free. We do not promise a time. Giving the output, fuel and standing in your first message helps more than anything else.

What should I do if I smell gas?

Leave the boiler off, open doors and windows if it is safe, do not use switches, and call the gas emergency number. Hiring a boiler comes after the building is safe.

Can we use portable heaters instead?

For a day or two in a few rooms, sometimes. For a whole building, or where hot water is also down, a hire boiler on the existing system is usually better.

What temperature must the building be?

Workrooms should normally be at least 16 °C, or 13 °C where work involves severe physical effort (HSE).

Will the hire firm repair our boiler too?

Some do. Most emergency hires run while your usual maintenance contractor repairs or replaces the plant. Tell us who looks after the boilers now.

Tell us what needs heating

We find a boiler hire firm that covers your site and give you their name before any of your details go to them. It costs you nothing.

What happens next

  1. We look for a hire firm that covers your postcode and the size of unit you need.
  2. We give you the firm's name first. Your details only go to them if you say yes.
  3. The firm checks the site, confirms the size and sends a written price.

Boiler Hire Company is an independent matching service, not a hire firm. If you hire through the firm we name, they pay us a fee; you pay us nothing.

Step 1 of 3
Where is the building?
Get a quote