Skip to content
Boiler Hire CompanyGet a quote
Menu

Electric Boiler Hire

Mobile electric boilers cover small heating loads and hot water without a flue or a fuel tank. They come in small sizes, roughly 3 to 36 kW, and the supply is what decides how big you can go.

Get a quote

When electric is the sensible choice

Electric hire suits some jobs well and others not at all.

SituationWhat usually works
Small office, shop or flat block circuitOften a good fit if the load is within the electric range.
Hot water onlyA good fit for a cylinder while the main boiler is out.
No gas, and nowhere for a fuel tankElectric avoids the fuel question altogether.
Large building or warehouseUsually too big. A gas or oil unit is more practical.

If your load is above the electric range, the sizing calculator will point you to a fuelled unit instead.

Size it before you ask

Our calculator turns floor area, height and insulation into a rough load and the next standard hire size up. No prices, just the size.

Open the sizing calculator

Hire firms price per week, often with a one-week minimum, plus delivery, connection and fuel. How hire is priced.

The supply sets the size

An electric boiler turns electricity straight into heat, so it draws roughly its rated output in electrical power. A 36 kW unit needs a supply that can deliver about 36 kW on top of whatever else the building is using. That's why electric hire boilers stop at small sizes, and why the first question is always what spare capacity you have.

The connection has to be made safely by a competent electrician. The Electricity at Work Regulations 1989 apply to the installation and use of the unit at work (legislation.gov.uk).

What you avoid

There is no flue, no fuel delivery and no bunded tank, so an electric unit can often go where a fuelled one cannot. On a tight site or for a short hire, that can outweigh the running cost of electric heat.

Running costs are the trade-off. Electricity usually costs more per unit of heat than gas, so for a long hire on a big load, a gas or oil unit tends to make more sense. You pay for the electricity used in either case.

Sources for this page

How the hire usually runs

  1. Check the supply

    Your electrician confirms the spare capacity where the unit will go.

  2. Size the unit

    The firm matches the unit to the load within that supply.

  3. Connect

    Electrical and water connections made and the unit tested.

  4. Collect

    Disconnected and collected when the main plant is back.

Electric Boiler Hire: common questions

What sizes do electric hire boilers come in?

Mobile electric boilers commonly run from about 3 kW to 36 kW.

Does an electric boiler need a three-phase supply?

The larger units usually do. What matters is that the supply can deliver roughly the unit's rated output on top of the building's other loads. Your electrician can confirm.

Is electric hire cheaper?

Not usually to run. Electric heat tends to cost more per kWh than gas. It can still be the better choice for small loads, short hires or sites with no fuel.

Can an electric boiler heat hot water?

Yes. Covering a hot water cylinder while the main boiler is out is one of the most common electric hires.

Does an electric boiler need a flue?

No. There is no combustion, so no flue and no fuel tank.

Tell us what needs heating

We find a boiler hire firm that covers your site and give you their name before any of your details go to them. It costs you nothing.

What happens next

  1. We look for a hire firm that covers your postcode and the size of unit you need.
  2. We give you the firm's name first. Your details only go to them if you say yes.
  3. The firm checks the site, confirms the size and sends a written price.

Boiler Hire Company is an independent matching service, not a hire firm. If you hire through the firm we name, they pay us a fee; you pay us nothing.

Step 1 of 3
Where is the building?
Get a quote